|
Q-controller
The Q-controller is an intelligent high-end port controller with
4 embedded clean relay contacts and 5 serial ports. The 4 serial ports
can be used for out-of-band management and the clean relay contacts, in
combination with a single port remote power switch (RE.99.R1Nx),
can be used for remote power management.
Many networked devices such as servers, routers and switches are accessible
through local serial console ports for initial configuration and emergency
management. Out-of-band management provides an alternative route that is
independent of the data network (WAN and/or LAN), using direct physical access
provided by management ports (serial console ports) of network and
infrastructure equipment.
The intelligent high-end port controller Q-controller can be used stand alone, daisy chained with multiple units
or in combination with the CDMA/CDMA1x data router (C-router)
or the GSM/GPRS data router (G-router).
 |
Description:
Q-controller
Intelligent Remote Console Port Controller
Order Number: RE.10.QRPC
The Q-controller is a self contained unit which can be connected
to up to four separate serial console ports of remote networking equipment.
The unit can be connected to a LAN network in which case access is provided via
a standard web browser or command line interface. An IP address to access
the unit can either be configured static or through DHCP.
Downloads:
Datasheet
|
|
 |
Description: Single Port Remote Power Switch
Order Number: RE.99.R1NC
The RE.99.R1NC is a single port remote power switch
that can be used to remotely control the power to an
external device, such as network routers. The unit
supports universal IEC320-C14 type input and
IEC320-C13 output connectors to easily fit between
the power cord and the device under control. The
RE.99.R1NC has a contact relay that is normally
closed (specify RE.99.R1NO for normally open). The
maximum switched current is 6A.
Downloads:
Datasheet
|
|
 |
Description: Passive Power Over Ethernet
Order Number: RE.99.PPOE
The RE.99.PPOE universal 20 Watt PoE power supply
provides power to devices through RJ45 jacks and
data over a single Ethernet cable. This compact,
self-contained device provides an efficient and
cost-effective solution to systems designers
confronting the need for additional electrical
outlets or the placement of network access points.
Downloads:
Datasheet
|
|
